To Next PageTo Next Page
Need help?Do you have a question about the nedis WIFIDW10WT and is the answer not in the manual?
Indicates the operational status of the device.
Button used to reset the water detector to its default settings.
The sensor component that detects the presence of water.
The connection port for attaching the water probe to the main unit.
Component for securing the water detector to a vertical surface.
Download, install, and launch the Nedis SmartLife app.
Add the device to the app and confirm Wi-Fi network.
Mount the bracket and position the detector and probe.
Read manual, use as intended, avoid damaged parts, indoor use only.
Use a soft, damp cloth; do not use solvents or clean inside.
Visit www.nedis.com/support for help, comments, or suggestions.
General| Product type | Sensor & alert system |
|---|---|
| Product color | White |
| Alarm decibels | 2 dB |
| Wall mountable | Yes |
| Operating frequency | 2400 - 2483.5 MHz |
| Connectivity technology | Wired & Wireless |
| Operating temperature (T-T) | 0 - 40 °C |
| Temperature measurement units | °C |
| Package height | 125 mm |
| Package weight | 121 g |
| AC input voltage | 3 V |
| Power source type | AC, Battery |
| Number of batteries supported | 1 |
Weight and Dimensions| Depth | 50 mm |
|---|---|
| Width | 105 mm |
