Do you have a question about the NEEWER VC-818TX and is the answer not in the manual?
Explains the 'Gr: Group Flash' display on the LCD screen, detailing current group, channel, and output settings.
Explains how to select and save one of the 8 available channels using the SYNC/CH button and dial.
How to select Gr mode by long-pressing the MODE button.
How to select flash groups A, B, or C using the GROUP button.
How to set flash modes (TTL, M 1/x, M, OFF) for a selected group using the MODE button.
Instructions on switching to Multi mode by long-pressing the MODE button.
How to select flash groups A, B, or C using the GROUP button in Multi mode.
How to set flash output power (1/4 to 1/128) for a selected group in Multi mode.
How to set modeling lamp output (1-6, OFF) for group A using the MODEL/AF button.
How to set modeling lamp output (1-6, OFF) for group B using the MODEL/AF button twice.
How to set modeling lamp output (1-6, OFF) for group C using the MODEL/AF button.
| Frequency Response | 20Hz - 20kHz |
|---|---|
| Battery Life | up to 8 hours |
| Input Connector | 3.5mm TRS |
| Output Connector | 3.5mm TRS |
| Audio Sampling Rate | 48kHz |
| Modulation Mode | FM |
| Transmitting Power | 10mW |
| Frequency Range | 2.4GHz |
| Transmission Range | Up to 328ft / 100m (open area) |
| Power Supply | Built-in rechargeable lithium battery |
| Operating Temperature | -10°C to 50°C |