NEFF A1/I96BMP5N0B Instructions For Installation And Use

en Installation
16
Fitting the lower support frame
Fasten the upper and lower part of the support frame at
the specified total height using 10 screws.
Notes
■ Ensure that the lower support frame is in the correct
position. The open side must be facing the hob
control elements.
■ The support frame can be subsequently
re-positioned by loosening the securing screws.
Fitting the appliance
1. Hook the appliance from below into the support
frame.
Note: Ensure that the mains cable is not trapped.
2. Fasten the appliance to the support frame
using 2 securing screws.
3. Hook in the retaining clip and screw tight.
([KDXVWDLU
PP
&LUFXODWHGDLU
PP
[



[
[

NEFF A1/I96BMP5N0B Specifications

General

Brand	NEFF
Model	A1/I96BMP5N0B
Category	Ventilation Hood
Language	English