What does “Fault: E0510” mean on my NEFF C1.KS61N0 Coffee Maker display?
If your NEFF Coffee Maker displays a fault code (e.g., “Fault: E0510”), the appliance has a fault. Proceed according to the instructions on the display screen.
What to do if drinks cannot be dispensed from NEFF Coffee Maker?
If drinks cannot be dispensed from your NEFF Coffee Maker, the beverage outlet or one of the connections may be blocked. Clean the beverage outlet and the connections.
What to do if drink runs out at the entire outlet during dispensing from NEFF Coffee Maker?
If the drink runs out at the entire outlet during dispensing from your NEFF Coffee Maker, the lower part of the beverage outlet may be missing. Attach the lower part.
Why does my NEFF C1.KS61N0 frequently display that descaling is necessary?
If your NEFF Coffee Maker frequently displays that descaling is necessary, the water may be too hard. Insert a water filter and configure the settings accordingly in the menu.
Why is my NEFF C1.KS61N0 display showing 'Refill with still water or remove filter'?
This message appears on your NEFF Coffee Maker because of several reasons: the water tank might be wrongly inserted, there is carbonated water in the water tank, the float is stuck in the water tank, the new water filter was not rinsed according to instructions, the water filter is defective or has been used, or there is air in the water filter. Make sure that you insert the water tank correctly and fill it with fresh tap water. Remove the tank and clean it thoroughly. Rinse the water filter according to the instructions, and then switch on or use a new water filter. Dip the water filter into water until no more air bubbles escape, then replace the filter.
What to do if my NEFF C1.KS61N0 Coffee Maker is dispensing too little milk froth?
If your NEFF Coffee Maker is dispensing too little milk froth, or none at all, or the milk system is not taking in any milk, there might be a build-up of limescale in the appliance, the beverage outlet or one of the 3 connections are blocked, the milk is not suitable for foaming, the beverage outlet or the milk tubes are not correctly assembled, or the suction pipe is blocked. Descale the appliance according to the instructions. Clean the beverage outlet and the connections. Do not use milk that has already been boiled; use cold milk with a fat content of at least 1.5%. Moisten the individual parts and put them together again. Clean the suction pipe.
What does it mean when my NEFF Coffee Maker display shows “Leave device to cool”?
If your NEFF Coffee Maker displays “Leave device to cool”, it means the appliance is too hot. Switch off the appliance for 30 minutes.
Why is the grinding level adjustment stiff on my NEFF Coffee Maker?
If the grinding level adjustment is stiff on your NEFF Coffee Maker, there may be too many beans in the grinding unit. Dispense a drink from coffee beans and only make subsequent changes to the grinding level in small steps.
Why is my NEFF C1.KS61N0 Coffee Maker coffee too weak?
If your NEFF coffee is too weak, it could be because the coffee strength selected is too weak or ground coffee is jammed in the coffee drawer. Raise the strength of the coffee and remove, clean, and thoroughly dry the ground coffee drawer.
Why is my NEFF C1.KS61N0 Coffee Maker coffee too bitter?
If your NEFF coffee tastes too bitter, it may be because the coffee is ground too finely or you are using an unsuitable type of coffee. Try adjusting the grinding level to a coarser setting or changing the type of coffee you use.
General| Brand | NEFF |
|---|---|
| Model | C1.KS61N0 |
| Category | Coffee Maker |
| Language | English |
Steps for initial assembly, filling, and basic configuration before first use.
Step-by-step guide for manually disassembling and cleaning the milk system components.
To Next Page
