NEFF D98IPT2S0B - Page 22

en Installation instructions
22
5.
Put the lower flue duct over the upper flue duct.
6.
Carefully remove the towels.
Installing design profiles
1
To install the design profiles, observe the enclosed in-
structions for the accessory.
Removing the appliance
Note:The design profiles are not hand grip elements.
Do not lift the appliance by the design profiles.
1.
Remove the design profiles.
2.
Undo the upper 2 nuts on the appliance bracket.
3.
Remove the appliance from the wall.
1
Depending on the appliance specifications