Need help?Do you have a question about the NEFF KI1813FE0 and is the answer not in the manual?
General| Current | 10 A |
|---|---|
| Connected load | 90 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Annual energy consumption | 115 kWh |
| Noise level | 37 dB |
| Climate class | SN-T |
| Fridge net capacity | 319 L |
| Automatic defrost (fridge) | Yes |
| Lamp type | LED |
| Cord length | 2.3 m |
| Temperature alarm | No |
| Door hinge | Right |
| Product color | White |
| Shelves material | Tempered glass/Plastic |
| Custom panel-ready | - |
| Appliance placement | Built-in |
| Fridge door balconies | 6 |
| Number of vegetable drawers | 2 |
| Fridge number of shelves/baskets | 7 |
Weight and Dimensions| Depth | 545 mm |
|---|---|
| Width | 558 mm |
| Height | 1772 mm |
| Weight | 61909 g |
| Installation compartment depth | 550 mm |
| Installation compartment width | 560 mm |
| Installation compartment height | 1775 mm |
Read and follow operating and installation instructions for important information.
Avoid electric devices inside and store flammable/explosive substances safely.
Improper installations/repairs are risky; use qualified persons and original parts.
Be aware that containers with carbonated drinks may burst.
Refrigerant R600a is flammable; avoid damaging tubes and keep away from ignition sources.
Supervise children and vulnerable people; ensure they understand hazards.
Keep keys out of reach; keep children away from packaging and parts.
Do not stand on base/runners/doors; keep plastic parts/seals clean; pull mains plug, not cord.
Appliance is heavy; note weight during installation and transport.
Dispose of packaging environmentally; recycle old appliances.
Check all parts upon unpacking; contact dealer for complaints.
Find refrigerant, cubic capacity, and technical specs on the rating plate.
Ensure room volume is adequate for refrigerant; avoid small rooms due to flammability risk.
Appliance performance depends on climatic class and room temperature.
Recommended cavity depth for installation to ensure efficient operation.
Follow tips for installation and usage to reduce power consumption.
Connect appliance to a properly installed socket; wait 1 hour before connecting.
Diagram showing main appliance parts and their labels.
Overview of buttons for power, super cooling, temperature setting, and alarm.
Details on shelves, vario shelf, extendable shelf, containers, and compartments.
Provides a better overview and can be completely removed.
Container can be removed or inserted on telescopic rails.
Flap opens downwards for easy access to the compartment.
Storage compartment can be removed by lifting it up.
Prevents bottles from overturning when opening/closing the door.
Press the power button to start cooling; set temperature afterwards.
Press power button to switch off; disconnect mains plug for prolonged periods.
Adjust refrigerator compartment temperature using the </▷ buttons.
Cools compartment rapidly; switch on/off with the super button.
Door alarm sounds if the door is open for over two minutes.
Store fresh food properly; pack or cover items to retain aroma and prevent flavour transfer.
Understand coldest and warmest zones for optimal food storage.
Adjust humidity for fruit/vegetables; be aware of cold-sensitive items.
Rear panel defrosts automatically; keep channel and hole clean.
Do not use abrasive cleaners or scouring sponges; avoid dishwashers for parts.
Steps for cleaning: switch off, unplug, remove food, clean with soft cloth and mild detergent.
Remove variable parts for cleaning.
Regularly clean condensation channel and drainage hole.
Instructions for removing and cleaning shelf above vegetable container.
Steps to address unpleasant odours: switch off, remove food, clean, seal strong smelling food.
LED light requires no maintenance; only authorized technicians can repair it.
Describes normal operating sounds like droning, bubbling, clicking, and cracking.
Tips to prevent noises: ensure appliance is level, check fittings, separate containers.
Troubleshooting steps for temperature issues: switch off, check temperature later.
Check mains plug, fuses, and power supply if displays are off.
If electronics detect a fault, contact customer service.
Check door status and ventilation openings; press alarm button to silence.
Check if Demo mode is switched on; perform self-test if needed.
Contact customer service for solutions; provide product and production numbers.
Run self-test to identify faults that customer service can rectify.
Contact information for repair orders and fault advice is available.
Warranty details are available from customer service, dealer, or website.
To Next Page
