en Basic operation
32
3. Press to resume the pro-
gramme.
4. Close the appliance door.
Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
1. Open the appliance door.
2. Press for approx.
4seconds.
3. Close the appliance door.
a All displays light up.
a As soon as the displays are off,
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1minute.
Switching off appliance
1. Please note the information on
"Safe use" →Page10.
2. Press .
Tip:If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
To Next Page
Loading...
Need help?
General
