NEFF S155HCX29E User Manual

en Troubleshooting
44
Fault Cause Troubleshooting
E:90-01 will light up altern-
ately.
Mains voltage is too low. This is not a fault on the appliance.
1. Contact an electrician.
2. Have the mains voltage and elec-
trical installation checked by an
electrician.
E:92-40 will light up altern-
ately.
Filters are soiled or blocked. ▶ Clean the filters.
→"Cleaning filters", Page40
A different error code ap-
pears in the display window.
E:01-00 to E:90-10
A technical fault is present. 1. Press .
2. Unplug the appliance or switch off
the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press ⁠.
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact "Customer Service"
→Page56 and give the er-
ror code.
Washing results
Fault Cause Troubleshooting
Tableware is not dry. No rinse aid used or dosage
set too low.
1. Add "Rinse aid" →Page26.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page27
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
▶ "Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme." →Page18
Some option buttons decrease the
drying result, e.g varioSpeed.

NEFF S155HCX29E Specifications

General

Category	Dishwasher
Model	S155HCX29E
Type	Freestanding
Number of Place Settings	14
Water Consumption per Cycle	9.5 liters
Noise Level	44 dB
Annual Energy Consumption	237 kWh
Drying Performance	A
Cleaning Performance	A
Width	60 cm
Depth	60 cm
Delay Start	Yes
Half Load Option	Yes
Child Lock	Yes
Water Softener	Yes
Salt Indicator	Yes
Rinse Aid Indicator	Yes
Size	Full-size
Annual Water Consumption	2660 liters
Programs	Auto, Eco, Glass, Intensive, Quick
Special Features	VarioSpeed