EasyManua.ls Logo

NEFF S517P70Y0G User Manual

NEFF S517P70Y0G
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Q
en Instruction manual
Dishwasher
S...

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the NEFF S517P70Y0G and is the answer not in the manual?

NEFF S517P70Y0G Specifications

General IconGeneral
TypeBuilt-in
CategoryDishwasher
SizeFull-size
Place settings14
Noise Level44 dB
Control typeElectronic
Dimensions (H x W x D)81.5 x 59.8 x 55 cm
ColorStainless Steel
Special featuresHygienePlus
Water Consumption9.5 L
Drying SystemHeat exchanger
Delay startYes

Summary

Intended Use

Safety Instructions

Before you switch ON the appliance

Read operating and installation instructions carefully before use and retain documents for future reference.

Getting to know your appliance

Control panel

Overview of buttons and indicators on the control panel, including ON/OFF, programme, info, and display.

Water softening system / special salt

Water hardness table

Table showing water hardness values and corresponding machine settings for soft, medium, and hard water.

Utensils

Loading the dishwasher

Place utensils securely, openings face down, at an angle for draining, and not obstructing spray arms.

Detergent

Adding detergent

Pour detergent into the dry dispenser. Dosage depends on soiling. Close cover securely.

Overview of programmes

Programme sequence

Details programmes like Auto, Chef, Eco, Glass 40, Night, including utensil types, soiling, and sequence.

Operating the appliance

Changing the settings

Change factory settings using Info button and selection buttons. Save all settings by holding Info button.

Cleaning and maintenance

Filters

Check and clean filters after each wash cycle to prevent blockages and ensure proper function.

Fault, what to do?

Fault table

Comprehensive table covering fault codes, causes, and remedial actions for supply, drying, detergent, and appliance issues.

Installation and connection

Electrical connection

Connect to AC using a grounded socket. Ensure socket is accessible. Use residual current circuit-breaker.

Related product manuals