Neilsen CT5673 - User Manual

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

SOLAR FENCE ENERGISER CT5673

INSTRUCTION MANUAL

WARNING: READ ALL INSTRUCTIONS!

If you suspect that the unit is not working, follow these steps:

1. Disconnect the unit from the fence and check that the indicator light is

flashing.

2. Check the battery connection and voltage.

3. Check that the voltage between the live and ground terminals is greater than

7000 v, using a fence voltage tester.

4. If these tests are OK, you have an installation problem.

Cannon Tools Limited

Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM

Table of Contents

Questions and Answers

C
Claudia RobinsonAug 6, 2025
What to do if Neilsen Power Supply pulse indicator is flashing but shock is weak?
- J
  Joshua RamirezAug 6, 2025
  If the pulse indicator light on your Neilsen Power Supply is flashing but the electric shock is weak, ensure all connections in the fence and ground system are firm and secure, cleaning away any corrosion if needed. Confirm the ground rod is firmly in the ground. Check the fence-line for obstructions like trees or vegetation, removing them and repairing the fence as necessary. Verify that the unit's rating is appropriate for the fence length; shorten the fence or reduce the number of wires if needed. Alternatively, divide the fence-line into smaller zones, each powered by a separate unit.
J
James OrtizAug 16, 2025
How to fix a Neilsen CT5673 Power Supply when the pulse indicator light is not flashing?
- T
  Tonya TannerAug 16, 2025
  If the pulse indicator light on your Neilsen Power Supply isn't flashing, first, make sure the unit is switched on. If there hasn't been enough sunlight to charge the battery, the unit might be in Standby mode. To resolve this, charge the battery by placing the unit in direct sunlight with the solar panel facing true south (in the northern hemisphere) or true north (in the southern hemisphere). Also, check that the battery is correctly connected, with the red lead to the positive terminal and the black lead to the negative terminal. You can also try manually charging the battery with a suitable charger and consider replacing the battery with a new one, fully charging it before installation. If the light still doesn't flash, please contact the seller.
E
Edward FarleyAug 27, 2025
Why does the Neilsen CT5673 Power Supply battery need frequent replacement?
- A
  Aaron MarshallAug 27, 2025
  To address frequent battery replacements in your Neilsen Power Supply, ensure the solar panel is clean and undamaged. Position the unit to receive maximum sunlight, and remove any objects or vegetation casting shadows on it.

Summary

1. SPECIFICATIONS

2. IMPORTANT SAFETY INFORMATION

General Safety Warnings and Notes

Covers essential warnings, notes, and general advice for safe operation and installation of the electric fence energiser.

DANGER AND CAUTIONS

DUTY TO THE PUBLIC

Definition of Special Terms

Requirements for Electric Animal Fences

3. TECHNICAL DESCRIPTION

4. UNPACKING AND CHECKING

5. BEFORE FIRST USE

Battery Insertion and Connection

Step-by-step guide on inserting a battery, connecting terminals, and initial charging procedures for the energiser.

6. INSTALLATION

Unit Positioning

Guidance on optimal placement of the energiser unit for maximum sunlight, fence proximity, and safety.

Unit Mounting

Instructions on how to mount the energiser unit, either on a flat surface or a post.

Connecting to Electric Fence

Detailed steps for connecting the ground rod and the fence output to the energiser unit for proper function.

7. OPERATION

Operation Modes and Indicators

Details on switching the unit on/off, pulse indicator, and Standby mode for optimal battery management.

8. BATTERY INFORMATION

Battery Charging and Details

Information on solar and external charging of the battery, including charger specifications and expected battery life.

Replacing the Battery

Guidelines for selecting and replacing the battery, including warnings about battery disposal and handling.

9. MAINTENANCE

10. STORAGE

11. TEMPORARY ELECTRIC FENCING

12. TROUBLESHOOTING

13. DISPOSAL

14. SYMBOLS

Summary

1. SPECIFICATIONS

2. IMPORTANT SAFETY INFORMATION

General Safety Warnings and Notes

Covers essential warnings, notes, and general advice for safe operation and installation of the electric fence energiser.

DANGER AND CAUTIONS

DUTY TO THE PUBLIC

Definition of Special Terms

Requirements for Electric Animal Fences

3. TECHNICAL DESCRIPTION

4. UNPACKING AND CHECKING

5. BEFORE FIRST USE

Battery Insertion and Connection

Step-by-step guide on inserting a battery, connecting terminals, and initial charging procedures for the energiser.

6. INSTALLATION

Unit Positioning

Guidance on optimal placement of the energiser unit for maximum sunlight, fence proximity, and safety.

Unit Mounting

Instructions on how to mount the energiser unit, either on a flat surface or a post.

Connecting to Electric Fence

Detailed steps for connecting the ground rod and the fence output to the energiser unit for proper function.

7. OPERATION

Operation Modes and Indicators

Details on switching the unit on/off, pulse indicator, and Standby mode for optimal battery management.

8. BATTERY INFORMATION

Battery Charging and Details

Information on solar and external charging of the battery, including charger specifications and expected battery life.

Replacing the Battery

Guidelines for selecting and replacing the battery, including warnings about battery disposal and handling.

9. MAINTENANCE

10. STORAGE

11. TEMPORARY ELECTRIC FENCING

12. TROUBLESHOOTING

13. DISPOSAL

14. SYMBOLS

Neilsen CT5673 Specifications

General

Brand	Neilsen
Model	CT5673
Category	Power Supply
Language	English