Need help?Do you have a question about the NEJE 3 MAX and is the answer not in the manual?
Covers initial setup steps including watching video tutorials and downloading software.
Detailed steps for assembling the NEJE 3 MAX laser engraver.
Instructions for extending the installation, likely for specific configurations or parts.
Guide on how to connect all necessary cables for the NEJE 3 MAX.
Information on adjustable and fixed focus modules and their adjustment methods.
Instructions for installing the air-assist feature on the NEJE 3 MAX.
Guidance on maintaining the NEJE 3 MAX, including belt adjustment and lens cleaning.
Important safety warnings and attention points for using the NEJE 3 MAX.
General| Laser Type | Diode Laser |
|---|---|
| Supported Materials | Wood, Leather, Acrylic, Plastic, Bamboo, Paper, Fabric |
| Connectivity | USB, Bluetooth |
| Software Compatibility | LightBurn |
| Input Voltage | 12V |
| Frame Material | Aluminum |
| File Format | BMP, JPG, PNG, DXF |
| Power Supply | 12V 5A |
To Next Page