Remember to leave no trace. Before leaving your campsite, take
a thorough look around making sure you have not left anything
behind, out of place, or damaged.
To contact NEMO Customer Service
Email: journey@nemoequipment.com
Phone: 800-997-9301
INSTRUCTIONS FOR SETUP
HORNET
™
ELITE
SERIES
1
2
3
4
5
©2019 NEMO Equipment, Inc.
Stake in Place
Position your tent as desired and stake the corner anchors. As you
pull at the corners, watch the tension in the floor of the tent to keep it
even. For hard ground, tie anchors to rocks or other heavy objects.
Insert Poles in Corner Anchors
Lay the inner tent on the ground and arrange pole set so
pole color matches corner webbing color. Insert locking
pole tips into corner grommets.
Attach the inner tent canopy to the poles using pole clips.
The integrated Flybar™ clip attaches like a normal pole clip
but significantly increases headroom and interior volume.
Attach Inner Tent to Poles
Attach Rain Fly
Cover the inner tent with the rain fly. Locate the webbing straps on
the corners of the fly and secure their grommets under the main
pole end tips.
Vestibule(s) and Tension Fly
Secure poles to rain y with internal pole wraps. Stake vestibule(s)
and pull rmly on all adjustable corner anchors. Add guylines for
additional strength. A properly tensioned tent ensures maximum
water shedding and wind resistance.
6
Volumize (optional)
Locate integrated small plastic hook(s) to connect rain fly to inner
tent near door(s). Attach each hook to its corresponding webbing
loop for increased interior volume.
To Next Page
Need help?
General
