NEO Coolcam NAS-WR01Z User Manual

Instruction Manual
Power
plug
Thank you for your support
 Please read the instruction manual carefully before operating
 Please keep the instruction manual after reading
Shenzhen NEO Electronics Co., LTD
Model:NAS-WR01Z

NEO Coolcam NAS-WR01Z Specifications

General

Brand	NEO Coolcam
Model	NAS-WR01Z
Category	Security Sensors
Language	English

Summary

Product Introduction

Technical Specifications

Key Features and Functionality

Product Configuration and Setup

Product Contents List

Lists the included items in the package.

Adding to Z-Wave Network

Details how to add the power plug to a Z-Wave network.

Removing from Z-Wave Network

Details how to remove the power plug from a Z-Wave network.

Installation and Usage Steps

Important Usage Tips

LED Indicator Status Meanings

Resetting to Factory Default Settings

Z-Wave Association Groups

Advanced Configuration Parameters

Meter Report Enable Setting

Enables or disables meter report data transmission to the controller.

Meter Report Interval Configuration

Sets the time interval for sending meter report data.

Maximum Over-Load Current Setting

Defines the maximum current the plug can supply to connected loads.

Maximum Alarm Current Setting

Sets the maximum current for triggering an over-current notification.

LED Display Enable/Disable Control

Controls the LED indicator function, enabling or disabling it.

Power Report Threshold Configuration

Sets the percentage of power consumption change that triggers a report.

Relay Status Memory Setting

Configures whether the plug remembers its last ON/OFF status after power loss.

Time Switch Function Enable/Disable

Enables or disables the timer function for the plug.

Time Switch Period Configuration

Sets the time period for the plug's auto-off timer function.

Supported Z-Wave Command Classes

Product Guarantee and Warranty