Neo.cortec NCxxxx series User Manual

Integration Manual for NCxxxx series Modules
Doc Status:
Release
Doc version:
2.2
Date:
Dec 2015
neo.cortec
.

Neo.cortec NCxxxx series Specifications

General

Brand	Neo.cortec
Model	NCxxxx series
Category	Control Unit
Language	English

Summary

1 Document Revisions

2 Introduction

3 Abbreviations

4 Definitions

5 System Considerations

5.1 Power Supply

Details voltage capabilities, I/O levels, and current sourcing requirements for the module.

5.2 Sleep Mode Operation

6 Wireless Encrypted Setup

6.1 Auto WES Initialization

Describes how the node starts in WES client mode automatically after power-up.

6.2 Force WES Client Mode

Explains how to manually force the node into WES client mode via a specific pin.

7 Serial UART Interface

7.1 Physical Interface Signals

Describes the signals used for UART communication, including pin assignments and purpose.

7.2 PC Integration via UART

8 Application UART Communication

8.1 Logical Data Exchange Format

Explains the general format of data frames and byte order for UART communication.

8.2 Commands and Application Data

Categorizes frames into commands accepted by the node and application data sent from the node.

8.2.1 List of Application Commands

8.3 API for Embedded Controllers

API Support Functions Overview

Details basic API functions like NcApilnit and NcApiSendAcknowledged for initialization and data transmission.

9 System UART Communication

10 Practical Examples

10.1 Network Data Transmission Example

Illustrates sending payload data between nodes in a NEOCORTEC network with acknowledgment.

10.2 Wireless Encrypted Setup Example

Demonstrates a network setup example where an unconfigured node joins a WES announcing network.