Leg cover lenght
Second, set the leg cover length. Using the 4 adjuster buckles (2 at the carabiners
and 2 at the end of the seat) adjust the length of the leg cover, making sure your legs
and torso remain relaxed.
Take care not to over tighten the upper 2 adjuster buckles as this will raise your feet
too high.
A short ight will allow you to conrm the adjustments. Remember that sensations
hanging statically in the shop and in the air can be quite different..
Speedbar
A 3-step speedbar is set up in the harness but an
adjustment before ight will be necessary for opti-
mum use. To set the length, use the sewn markers
on the speedbar line (every 10cm) to ensure the
system is symmetrical.
48
EN
To Next Page
Loading...
