Neogen Corporation 4700

Need help?

Do you have a question about the Neogen Corporation 4700 and is the answer not in the manual?

Summary

Section 1. Installation

1.1 Unpacking and Installation

Safely unpack the instrument, report damage, and place it on a stable surface with adequate ventilation.

1.2 Load Paper

Step-by-step guide for loading thermal printer paper into the Neogen 4700 Reader.

Section 2. Set up

2.1 Starting the Reader

Powering on the instrument and ensuring the printer is enabled via the settings menu.

2.2 Using the Touch Screen

Instructions on interacting with the reader's touch screen using a stylus or direct touch.

2.3 The Home Screen

Overview of the icons and functions available on the reader's main home screen.

2.4 Utility Menu

Details on accessing and using the utility menu for advanced functions like version details and test erasing.

Section 3. Running the Test

Section 4. Reading and Calculating Results

Section 5. Reading and Calculating GeneQuence Results

Section 6. Maintenance

Section 7. Settings

7.1 Printer Setup

Instructions on how to set up and enable the reader's built-in printer.

7.2 Adjust Date and Time

Procedure for setting the correct date, time, and date format on the reader.

7.3 Lamp Control

How to adjust the lamp's on-time and warm-up time settings.

7.4 Laboratory Name

Instructions for changing the laboratory name displayed upon reader startup.

7.5 Strip Format

How to configure the reader for 8-well or 12-well strip formats.

7.6 Sound Settings

Customizing startup sounds, icon press sounds, and volume levels.

7.7 External Output

Configuring the reader for data storage and transmission via USB connection.

Section 8. Cloning Tests

Section 9. Editing Preprogrammed Tests

Section 10. Programming New Test Parameters

Section 11. Deleting Tests

Section 12. Restore Tests

Section 13. Modes

Section 14. Troubleshooting