Neogen Corporation AccuPoint 2 ATP User Manual

1AccuPoint 2 User’s Guide
CONTENTS
Introduction .......................................................................................................... 2
Parts included ....................................................................................................... 3
Operating guidelines and precautions ................................................................... 3
Preparing the instrument for use ........................................................................... 4
Description of the test screen display .................................................................... 5
Selecting the testing site ....................................................................................... 6
Adjusting the display’s contrast ............................................................................. 7
Record count and test recall ................................................................................. 7
Operating procedure ............................................................................................. 8
Setting the time and date .................................................................................... 10
Powering the AccuPoint 2 system ....................................................................... 10
Recharging the batteries ..................................................................................... 10
Installing new batteries ....................................................................................... 11
Sleep mode ........................................................................................................ 11
Communicating with the Data Manager software ................................................ 11
Downloading test results to the Data Manager software ...................................... 11
Setting thresholds in the instrument ................................................................... 12
Cleaning the instrument ...................................................................................... 12
Troubleshooting .................................................................................................. 13
Regulatory information ....................................................................................... 14
Replacement parts/accessories .......................................................................... 15
Warranty ............................................................................................................. 15
Customer service/contact information ................................................................. 15
Neogen Corporation • 620 Lesher Place • Lansing, MI 48912
800/234-5333 or 517/372-9200 • foodsafety@neogen.com • www.neogen.com
AP2 Users Guide1a.indd 1 10/20/2009 3:47:37 PM

Neogen Corporation AccuPoint 2 ATP Specifications

General

Model	AccuPoint 2 ATP
Technology	Bioluminescence
Display	LCD
Power Supply	2 AA Batteries
Connectivity	USB
Type	ATP Hygiene Monitoring System
Measurement Range	0 to 9999 Relative Light Units (RLU)
Detection Time	Real-time
Operating Temperature	50°F to 104°F (10°C to 40°C)

Summary

Operating Guidelines and Precautions

Safety, Handling, and Care Instructions

Preparing the Instrument for Use

Initial Charging and System Initialization

Steps for charging batteries, powering on, and completing the instrument's self-test and initialization.

Understanding the Test Screen Display

Selecting a Testing Site

Setting Pass, Marginal, and Fail Thresholds

Operating Procedure: Performing Tests

Pre-Test Preparation and Warm-up

Instructions for warming up sampler cartridges and the instrument for optimal accuracy.

Surface Sampling Technique

Detailed steps for collecting a surface sample, including area coverage and pressure.

Liquid Sampling Technique

Guidance on immersing and withdrawing the water sampler for liquid sample collection.

Inserting Sampler and Starting Measurement

Steps to insert the sampler into the instrument and initiate the measurement process.

Understanding Test Result Symbols

Setting Time and Date

Powering and Charging the System

Installing New Batteries

Connecting to Data Manager Software

Downloading Test Results to Software

Data Transfer and Instrument Reset

Configuring Instrument Thresholds

Cleaning the Instrument

Troubleshooting Common Issues

Interpreting Troubleshooting Icons and Actions

Explains icons for temperature, sampler presence, and battery issues, with corrective actions.

Replacement Parts and Accessories

Customer Service and Contact Details