EN
NEON NITRO 8
Safety Equipment
HELMET
Always wear a properly tted helmet when riding NEON NITRO 8. Be sure to attach the chinstraps
and follow the helmet manufacturer’s instruction manual. We would also recommend wearing wrist
guards, elbow pads and kneepads for extra protection.
FOOTWEAR
Make sure you wear at shoes that will grip the board and not slip off your feet while using NEON
NITRO 8. Do not ride barefoot or in sandals.
SAFETY CHECK
Checking your NEON NITRO 8 regularly will help extend the life of your product. Make sure there
are no loose or damaged parts. All nuts and bolts should be tight and all other components should
be in good condition. If you nd any breakages please do not use the product until it has been
repaired.
Warning!
Please adhere to your local area’s trafc laws. It is your responsibility to familiarize and comply
with these laws. Always be aware of potential hazards and obstacles when using NEON NITRO 8.
Warning: Before performing safety inspection or maintenance on your NEON NITRO 8 make sure
the power is off.
Caution!
Riding with a damaged NEON NITRO 8 will void its warranty.
Motor power 350 W
Battery 36.5 V | 4.3 AH | Lith-ion
Tire Size 203 mm | 8 inches
Top Speed 12.5 kmh | 7.7 mph
Run Time 60 minutes
Dimensions
705 x 235 x 226 mm
27.7559 X 9.252 X 8.898 inch
Product Weight 10.6 kg | 23.4 lbs
Max User Weight 70 kg | 154 lbs
Input
AC 100-240 V
50/60 HZ
Output plus 42 DC 2 Amp
Charging Time 2.5 - 3 hours
Model Number FY - 4202000
Supplier
Shenzhen
Fuyuandian Power
Co.,Ltd
UL ID E350715
Product specications
PRODUCT PARAMETERS
Charger specications
Use only with specied charger
in instruction.
8
To Next Page
Loading...