Why is my Neostar Electronics Fan so noisy?
If your Neostar Electronics Fan is noisy during operation, try the following: * Check that the fan is unobstructed and not touching the safety guard. * Make sure the fan blade is securely fastened to the motor. * Ensure the fan blade is clean and free from any dirt or debris.
What to do if my Neostar Electronics Fan stops working during use?
If your Neostar Electronics Fan stops working during use, unplug it and allow it to sit for 10 minutes before reconnecting it.
Remove packaging, insert upright pole into the base, and secure with hex bolt.
Attach fan head to upright pole and connect power supply to mains.
Control fan power and adjust speed using buttons on the fan or remote.
Activate or deactivate the fan head oscillation feature with a button press.
Set a countdown timer (1-9 hours) to automatically switch off the fan.
Purify air using the plasma function, operated via the remote control.
Utilize the remote control for fan functions; sensor is located at the base.
Solutions for common fan issues like not working, noise, or stopping.
Details on model number, voltage, cord length, motor, tilt, oscillation, and timer.
General| Type | Ceiling Fan |
|---|---|
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Light Kit Included | Yes |
| Remote Control Included | Yes |
| Motor Type | AC Motor |
To Next Page
