Why is my Neostar Electronics Fan making abnormal noise during working?
Abnormal noise can occur if the fan isn't on a flat surface. Ensure it is placed on a level surface. Also, check if the front guard or blade is assembled correctly and adjust if necessary. If these steps don't resolve the issue, the motor may be malfunctioning, requiring maintenance.
What to do if my Neostar Electronics Fan fails to operate?
First, make sure the power cord is properly plugged in. If the fan still doesn't operate, the motor might be malfunctioning, and it should be returned for maintenance.
Why is my Neostar Electronics Fan wind speed weaker?
A weaker wind speed is often due to excessive dust on the fan blades. Clean the blades regularly to maintain optimal performance.
General| Brand | Neostar Electronics |
|---|---|
| Model | 318 4303 |
| Category | Fan |
| Language | English |
Controls the fan's power state, turning it on or off.
Allows selection between Normal, Natural, and Sleep operational modes.
Adjusts fan speed levels from 1 to 8 using '+' and '-' controls.
Sets auto shutdown or power-on times, speed, and oscillation.
Activates and deactivates left-right and up-down oscillation modes.
Controls the illumination of the digital display panel.
Enables automatic speed adjustment based on ambient temperature.
Instructions for turning the fan on, off, and its initial speed state.
Details on increasing/decreasing speed levels and display indications.
Steps to activate/deactivate left-right, up-down, and combined oscillation.
Instructions for setting auto shutdown or power-on times.
How to select Natural, Sleep, and ECO modes, and their behavior.
Steps to remove the front guard and fan blade for cleaning.
Troubleshooting steps for when the fan does not turn on.
Addresses causes of unusual noise during fan operation.
Troubleshooting steps for reduced airflow, including dust buildup.
Information on unusual sounds specifically during oscillation.
To Next Page
