Do you have a question about the Neousys Technology NRU Series and is the answer not in the manual?
Details the version history of the manual, including date and release notes.
Provides detailed specifications for the NRU-110V model, including system core, I/O, power, and environmental.
Provides detailed specifications for the NRU-120S model, covering system core, I/O, power, and environmental parameters.
Details the physical dimensions of the NRU series, including front, side, rear, and bottom views.
Lists all items included in the NRU-110V package, including the main unit and accessories.
Lists all items included in the NRU-120S package, detailing the main unit and accessories.
Details the function and operation of the system's power button for turning the system on/off.
Explains the purpose and usage of the system's reset button for manual system resets.
Describes the PoE+ ports, their functionality, and LED indicators for data and link status.
Details the four system LED indicators (PWR, HDD, IGN) and their respective colors and meanings.
Explains the DisplayPort output, its resolution capabilities, and recommendations for adapters/cables.
Describes the two front-accessible hot-swappable HDD/SSD trays for storage expansion.
Details the two USB 3.1 Gen1 ports on the front panel and their compatibility.
Explains the purpose of the force recovery button for system recovery or reflash.
Details the DIO port, its pins, and functionality for GPS PPS, digital input, and digital output.
Describes the ignition control switch for configuring ignition power on/off delay modes.
Explains the 3-pin terminal block for DC power input and ignition signal input.
Details the CAN bus port for communication with other CAN devices.
Describes the RS-232 COM port for communicating with external devices.
Explains the camera ports supporting automotive camera sensors (NRU-110V only).
Details the rear DisplayPort for high-resolution graphics output.
Describes the rear USB 3.1 Gen1 ports for data transfer.
Explains the reserved micro-USB port for system reflashing.
Details the 10GbE Ethernet port for high-bandwidth connectivity (NRU-110V only).
Describes the M.2 2280 slot for installing NVMe SSDs for high performance.
Details the mini-PCIe and SIM card slots for adding features like Wi-Fi, GPS, or 3G/4G.
Provides step-by-step instructions on how to disassemble the system enclosure for component installation.
Guides the installation of mini-PCIe modules and SIM cards into the system.
Provides instructions for installing an M.2 2880 NVMe SSD into the system.
Details the process of reassembling and installing the system enclosure after component installation.
Guides the installation of the anti-vibration mount to the system enclosure.
Explains how to power on the system using the front panel power button.
Illustrates the basic concept and timing correlation for ignition power control.
Details features like low battery detection, system hard-off, and smart off-delay.
Provides instructions on how to wire the IGN signal for in-vehicle ignition control.
Explains how to configure operation modes using the rotary switch for power-on/off delays.
Provides information on accessing the NRU FTP server for released files.
Lists the necessary hardware and software items required for reflashing the NRU system.
Details steps for preparing the host machine, including installing Ubuntu and SDK Manager.
Guides preparation of the target NRU machine, including ignition switch setting and connections.
Details the process of flashing the NRU system using NVIDIA's SDK Manager.
Instructions for reflashing the system using Neousys' pre-built image from FTP.
Recommends using NVIDIA SDK Manager for reflashing and notes potential dtb issues.
Provides steps to clone the RAW image and convert it to a sparse system image for backup.
Introduces built-in camera drivers and demo folders for the NRU-110V.
Provides a critical warning about potential damage from OTA updates and how to prevent it.
| Brand | Neousys Technology |
|---|---|
| Model | NRU Series |
| Category | Desktop |
| Language | English |