Neptronic TSUB00 Series - User Manual

Networkable Universal Wall-Mount Controller
Specification and Installation Instructions
TSUB-200306 Page | 1
Models
Model
Temp
RH
PIR
TSUB00-100
TSUB30-100
TSUB60-100
●
TSUB00-101
TSUB30-101
TSUB60-101
●
●
TSUB00-104
TSUB30-104
TSUB60-104
●
●
TSUB00-105
TSUB30-105
TSUB60-105
●
●
●
TSUB00 Series
TSUB30 Series
TSUB60 Series
Description
The TSUB is a universal wall-mount controller with a built-in temperature sensor. The unit is designed for simple and accurate
control of a fan coil unit or heating/cooling equipment. Its field configurable algorithms enable versatile implementation of
required control sequences.
Featuring an external humidity sensor input for accurate humidity control, this comprehensive unit also provides a
dehumidification sequence compensated by auto activation of reheat output.
The controller is available with additional sensors, such as the PIR motion detection and humidity sensor, providing more
functionality for the terminal device.
Features
• Fan control: 1, 2 or 3-speed (auto/on), or analog (ECM)
• Optional internal/external humidity sensor input for
simple and accurate humidity control
• Dehumidification sequence compensated by auto
activation of reheat output
• Real time clock (RTC) with 24-hour backup
• 7-day programmable schedule
• Precise temperature control with configurable PI
(Proportional-Integral) function
• Selectable internal or external temperature sensor
• Low limit set protection (10°C / 50°F)
• Occupancy and night set back (NSB) mode
• Select direction on outputs
• Select controller’s default display
• Multi-level lockable access menu and setpoint
• Selectable Fahrenheit or Celsius scale
• Option of pulse/floating/on-off output on binary outputs
• Internal/external occupancy input
• Compressor anti-cycling delay (configurable)
• ΔT control (on request)
Onboard Sensors
• Temperature sensor (°C/°F)
• Humidity sensor (%RH), select models
• PIR motion detection sensor, select models
Network Communication
• BACnet
®
MS/TP or Modbus communication port
(selectable via configuration menu)
• Select MAC address via menu or via network
• Automatic baud rate detection
BACnet MS/TP
®
• Automatic device instance configuration
• Copy & broadcast configuration via menu or via BACnet
to other controllers
• BACnet scheduler (up to 6 events per day)
• Firmware upgradeable via BACnet
• Supports COV (change of value)
Modbus
• Modbus @ 9600, 19200, 38400 or 57600 bps
• RTU Slave, 8 bits (configurable parity and stop bits)
• Connects to any Modbus master

Neptronic TSUB00 Series Specifications