To Next PageTo Next PageWhy does my NEPTUN classic Switch pump cut out and in constantly?
If the NEPTUN classic Switch pump cuts out and in constantly, it's likely due to a leak on the output side. Inspect the consumers and the output line to identify and fix any leaks.
What to do if NEPTUN classic NDE 10 pump does not cut out?
If the NEPTUN classic Switch pump does not cut out, it could be due to a leak on the output side or an open consumer. First, check the consumers and output line for any leaks. If no leaks are found, ensure that the consumer is closed.
How to troubleshoot NEPTUN classic Switch when the pump does not cut in?
If the NEPTUN classic Switch pump does not cut in, there could be several reasons: * **Power failure:** Check the cable and fuse to ensure they are functioning correctly. * **Pump not switched on:** Make sure the pump is properly switched on. * **No transport fluid being discharged:** If the output line is adequately pressurized, open the consumer.
Indicates connection to the power supply.
Indicates the switch has tripped; socket is live.
Indicates the flow switch has detected a fault.
Describes LED combinations indicating pump and switch status.
General| Brand | NEPTUN classic |
|---|---|
| Model | NDE 10 |
| Category | Switch |
| Language | English |
