Notes: Chiller will turn on when temperature rises above 78.0 and turn off
when it goes above 77.0 If chiller has internal thermostat set it slightly
below the “On Temp,” so 76.0)
Control Type: Pump
If you wanted to configure a powerhead to turn on/off every 30 seconds and
off when a “feed mode” is activated. Select “Pump” option in “Control Type”
Initial Off Time: 0:00
On Time: 0:30
Off Time: 0:30
Feed Timer: A
Feed Timer Delay: 0
Notes: A power head programmed to run opposite of this one would reverse
the Initial Off (0:30) and Off time (0:00)
To Next Page
Loading...