EnergyBar 832 - User Guide Page 3
• Fallback fail-safe setting. If communication failure occurs between the Apex and
the EnergyBar 8, each outlet can be configured to revert to a user-configurable
default setting
• High reliability direct wired connection to the Apex System through the AquaBus
IMPORTANT USAGE INFORMATION
WARNING – DO NOT EXCEED ELECTRICAL RATINGS:
• The maximum load rating of each individual AC outlet is 7 amps; do
not exceed this.
• The total current/power draw for all active outlets must not exceed
15 amps or 1500 watts, whichever is less.
• The combined total maximum load on the (2) DC24 outputs and the
(3) 1LINK ports must not exceed 100 watts.
WARNING: The Energy Bar 832 contains no fuses or other user-
serviceable parts. Do not attempt to perform any repairs or modifications
to the Energy Bar 832. If the power cord is damaged, it must be replaced
by Neptune Systems, its service agent or similarly qualified persons in
order to avoid a hazard.
The EnergyBar 832 is intended for indoor use only.
The EnergyBar 832 is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
To Next Page
Loading...