EnergyBar 832 - User Guide Page 6
• The EnergyBar 832 should be grounded to minimize the possibility of electric
shock. It is equipped with an electric cord having an equipment grounding
conductor and a grounding type plug. The plug must be plugged into an outlet
that is installed and grounded in accordance with all appropriate codes and
ordinances.
• The EB832 must be mounted in a horizontal and upright orientation as shown:
After mounting, plug the EnergyBar 832 power cord into a grounded receptacle
supplied electrical power by a 15 ampere or 20 ampere branch circuit which is
protected by a Ground Fault Circuit Interrupter (GFCI) or Residual Current Device
(RCD).
To Next Page
Loading...