To Next PageTo Next PageWhat to do if the lamp operation LED is not glowing on my Neptune WTA-10?
If the Neptune Water Dispenser's lamp operation LED is not glowing, first, check if there is power at the outlet. If power is available, the ballast may need to be replaced.
How to fix a leaking Neptune Water Dispenser?
If your Neptune Water Dispenser is leaking, make sure the compression nut is tight and that the inlet pressure doesn't exceed 100 PSI. Also, ensure the O-Ring is properly seated and lubricated with food-grade silicone. Check the O-Ring for any cracks or tears, replacing it if necessary. Inspect the quartz sleeve for cracks or chips; if damaged, contact your dealer for a replacement.
What does it mean when the lamp operation LED is red on my Neptune Water Dispenser?
If the lamp operation LED on your Neptune Water Dispenser is red, you should replace the lamp.
What happens if my Neptune WTA-10 loses power?
If you experience power failure with your Neptune Water Dispenser, the unit will restart automatically once power is restored. The unit is designed for continuous operation, so avoid connecting it to timers or similar devices that cause cycling, as this can reduce the lamp's lifespan.
What to do if my Neptune WTA-10 Water Dispenser has poor bacterial performance?
If you notice poor bacterial performance with your Neptune Water Dispenser, replace the lamp if it's older than 365 days or nearing its end-of-life. Perform routine maintenance. Check the water quality against the maximum concentration levels in Table 1 of the Pre-Installation Instructions, and take corrective action if needed. Verify the flow rate against disinfection levels in Technical Specifications Table 3.
General| Brand | Neptune |
|---|---|
| Model | WTA-10 |
| Category | Water Dispenser |
| Language | English |
This symbol indicates that eye protection must be worn to protect from UV light as well as debris.
This symbol signifies that hand protection must be worn to protect the lamps from skin oils as well as protect the operator from UV light and sharp materials.
This symbol signifies electrical shock possibility. Failure to observe this warning may lead to serious injury or death.
This symbol indicates a potentially dangerous situation. Failure to adhere to this warning may lead to serious injury and/or death.
