NERONE GN - Page 48

IT |
NERONE
| Manuale d’uso e manutenzione
48
ACTIONS ON THE CONTROL IN PROGRESS
CHAMBER PROBE
The chamber probe error condition causes the following actions:
• displaying of the code Pr1
• deactivation of the oven
When the faulty chamber probe condition stops, control resumes normally.
CARD PROBE
The card probe error condition causes the following actions:
• displaying of the code Pr3
• total deactivation of the card and oven
ATTENTION
When the faulty card probe condition stops, regulation does NOT resume normally and a switch shut-
down is required.
NOTIFICATIONS
CODE MEANING
Pr1
error probe1
Pr2
error probe 2
Pr3
error probe 3