Need help?Do you have a question about the Nescafe alegria A510-1.0 and is the answer not in the manual?
General| Model | A510-1.0 |
|---|---|
| Brand | Nescafe |
| Power | 1450 W |
| Voltage | 220-240 V |
| Material | Plastic |
| Color | Black |
Critical safety warnings regarding severe injury or death if instructions are not followed.
Important safety cautions about property damage or minor injury from improper use.
Guidelines for proper electrical use, handling, and user suitability for safe operation.
Additional operational advice like rinsing cycles and component insertion for safe use.
Identification of physical parts like water tank, powder container, and drip tray.
Description of user interface buttons and drink selection options.
Specifications including voltage, power, pressure, capacity, and dimensions.
Steps for initial setup, including cleaning and filling the water tank.
Instructions on how to load the coffee powder into the machine.
Steps for preparing espresso, lungo, and americano beverages.
Instructions for making milk-based drinks like cappuccino and latte macchiato.
Initial cleaning steps, milk measurer care, and chamber unlocking.
Detailed instructions for cleaning the mixing chamber and its parts.
Steps for emptying and cleaning the powder container.
Final rinsing, drying, and reassembly of cleaned components.
Steps to prepare the machine for extended periods of non-use.
Steps to prepare the machine for use after a period of inactivity.
Explanation of different LED indicators and their blinking sequences.
Status LED and product LED behavior for energy-saving mode.
Status and product LED indications during the heating cycle.
Status and product LED indications when the machine is ready for use.
Status and product LED indications during beverage preparation.
What to do when the machine is not ready and all LEDs are off.
Troubleshooting steps when the cover or drawer is not closed properly.
Solutions for interrupted beverage preparation, e.g., low water.
Actions to take when the machine requests a rinsing cycle.
Troubleshooting steps for an empty or missing water tank.
Steps to follow when an error code is indicated by the LEDs.
Solutions for issues like splashed drinks.
Steps to resolve issues of no or inconsistent beverage flow.
Steps to take when only water is dispensed, indicating an empty powder container.
Identification of water tank and its lid as spare parts.
Identification of the docking unit and drip tray as replaceable parts.
Identification of powder container, cap, and mesh as spare parts.
Identification of the mixing chamber and drawer as replaceable components.
To Next Page