Neslab RTE-221 - Error Reporting

- 15 -
Error Messages
Error Action
Er00: ROM Checksum
Er01: RAM Test Failed
Er03 Keypad Test Failed
Er04-13: Interrupt Error
Er14: Synchronous Error
Er15: Asychronous Error
Er16: Bad Calibration
Er19: Low Temp Limit
Er21: High Temp Limit
Er23: RTD2 Shorted
Er24: RTD2 Open/Not Installed
Er25: RTD1 Shorted
Er26: RTD1 Open
Er34: High Temperature Cutout
NOTE: Errors 1 through 16 will lockup the controller keypad.