To Next Page
M
Matthew TorresAug 19, 2025
What to do if Nespresso C50 Coffee Maker brewing unit leaks?
- KKimberly ParkerAug 19, 2025
If the brewing unit of your Nespresso Coffee Maker leaks, replace the brewing unit.
What to do if Nespresso C50 Coffee Maker brewing unit leaks?
If the brewing unit of your Nespresso Coffee Maker leaks, replace the brewing unit.
Why is the flow rate low on my Nespresso C50 Coffee Maker?
If the rate of flow is not within the standard range, it may be because the Nespresso Coffee Maker is calcified. Descale the coffee machine.
What to do if my Nespresso C50 temperature is too low?
If the temperature of your Nespresso Coffee Maker is too low (below 83°C), descale the coffee machine.
Why is there no water coming out of my Nespresso C50?
If there is no water at the coffee machine outlet of your Nespresso Coffee Maker, it could be due to a few reasons: a blocked pyramide plate, a blocked flowmeter, or the pump not producing sufficient water pressure. To resolve this, replace the brewing unit if the pyramide plate is blocked, clean or replace the flowmeter if it's blocked, or replace the pump if it cannot produce sufficient water pressure.
What to do if hose connections leak on Nespresso C50 Coffee Maker?
If the hose connections of your Nespresso Coffee Maker leak, replace the high pressure connector.
Why are there calcium and rust particles in my Nespresso Coffee Maker water?
If you notice particles of calcium and rust in the water of your Nespresso Coffee Maker, descale and rinse the coffee machine again to clean the water circuit.
How to fix damaged power cord on Nespresso C50?
If the power cord of your Nespresso Coffee Maker is damaged, replace the power cord.
Why are both coffee buttons blinking 3x fast on my Nespresso C50?
If both coffee buttons are blinking 3x fast on your Nespresso Coffee Maker, replace the thermoblock or functional block.
What causes the temperature to be too high on my Nespresso Coffee Maker?
If the temperature of your Nespresso Coffee Maker is too high (over 89°C), replace the thermoblock.
What to do if capsule is not ejected correctly from Nespresso C50?
If the capsule is not ejected correctly from your Nespresso Coffee Maker, replace the brewing unit.
General| Model | C50 |
|---|---|
| Type | Espresso Machine |
| Water Tank Capacity | 0.7 liters |
| Pump Pressure | 19 bar |
| Used Capsule Container Capacity | 9-11 capsules |
| Weight | 3.5 kg |
| Power | 1260 W |
| Automatic Shut Off | Yes |
| Brand | Nespresso |
| Color | Various |
| Voltage | 220-240 V |
| Cord Length | 0.8 meters |
| Heating Time | 25 seconds |
| Removable Drip Tray | Yes |
| Compatible Capsules | Nespresso capsules |
