❹ Press the Espresso (40 ml) or the Lungo (110 ml) button to start.
Preparation will stop automatically. To stop the coffee flow or top up
your coffee, press again.
❺ Remove the cup. Lift and close the lever to eject the capsule into
the used capsule container.
Never lift the lever during operation and refer to the important safeguards to avoid possible harm when operating the appliance.
Coffee Preparation /
❷ Place a cup under the coffee outlet.
Press and hold the Espresso or Lungo button.
Release button once the desired volume is served.
LED will blink fast 3 times to confirm new setting.
Water volume level is now stored.
LED
❶ Turn the machine on and wait for it to be in ready mode
(steady lights).
Fill the water tank with fresh potable water and insert the
capsule.
Programming the Water Volume /
During heat up, you can press either coffee button while blinking. The coffee will then flow automatically when the machine is ready.
UM_NESPRESSO_ESSENZA_MINI_Z3_.indb 11 20.02.17 14:20
To Next Page
Loading...
Need help?
General
