What to do if all 3 beverage buttons are blinking fast on my Nespresso KRUPS ESSENZA PLUS?
If all 3 beverage buttons on your Nespresso Coffee Maker are blinking fast, it could mean the machine is overheating or is in an environment below 0°. Wait for the blinking to stop, which may take a few minutes, during which time the machine cannot be used. If the problem persists, contact Nespresso.
Why is the descaling alert blinking on my Nespresso Coffee Maker?
If the descaling alert is blinking on your Nespresso Coffee Maker (descaling alert level 1), you should descale the machine.
Why is the One-Touch Order button on my Nespresso KRUPS ESSENZA PLUS showing an orange light?
If the One-Touch Order button on your Nespresso Coffee Maker shows an ORANGE LED, check the following: 1. Ensure the machine is paired with your smartphone or tablet and that Wi-Fi is connected. You can check the connectivity status via the App. 2. Verify that an order is configured and linked to the machine via the App. 3. Check if an order is already ongoing. The One-Touch Order button will be active again once your current order is shipped.
What to do if the capsule area is leaking on my Nespresso KRUPS ESSENZA PLUS?
If the capsule area of your Nespresso Coffee Maker is leaking (water in the capsule container), make sure you position the capsule correctly.
What does it mean when the descaling alert light is steady on my Nespresso Coffee Maker?
If the descaling alert is showing a steady light on your Nespresso Coffee Maker (descaling alert level 2), descale the machine immediately to avoid a decrease in machine performance and coffee quality.
What to do if my Nespresso KRUPS ESSENZA PLUS has no coffee and no water?
If your Nespresso Coffee Maker is not dispensing coffee or water, try the following: * If using for the first time, fill the water tank with warm water (max. 55° C) and run the machine according to the instructions. * Ensure the water tank is filled. * Descale the machine if necessary.
How to fix slow coffee flow from my Nespresso KRUPS ESSENZA PLUS Coffee Maker?
If coffee comes out very slowly from your Nespresso Coffee Maker, consider the following: * Descale the machine if necessary. * Preheat your cup.
Why is coffee not hot enough in my Nespresso KRUPS ESSENZA PLUS Coffee Maker?
If the coffee from your Nespresso Coffee Maker is not hot enough, descale the machine if necessary.
What does it mean when all 4 buttons are blinking alternatively on my Nespresso KRUPS ESSENZA PLUS?
If all 4 buttons on your Nespresso Coffee Maker are blinking alternatively (from front to back), a firmware update is in progress. Wait a few minutes until the update is completed. The machine cannot be used during this time.
How to fix pairing issues with my Nespresso KRUPS ESSENZA PLUS Coffee Maker?
If the pairing of your Nespresso Coffee Maker with your device has not succeeded, check the following: * Ensure that Bluetooth[®] is activated on your smartphone or tablet. * Verify the compatibility of your smartphone or tablet with the machine. * Make sure the smartphone or tablet is placed next to the machine (max distance 20 cm) during pairing. * Ensure no microwave is turned on close to the machine during pairing.
General| Brand | Nespresso |
|---|---|
| Model | KRUPS ESSENZA PLUS |
| Category | Coffee Maker |
| Color | Black |
| Pump Pressure | 19 bar |
| Power | 1260 W |
| Voltage | 220-240 V |
| Material | Plastic |
| Compatible Capsules | Nespresso capsules |
| Auto Power Off | Yes |
| Energy Saving Mode | Yes |
| Type | Espresso Machine |
| Used Capsule Container Capacity | 6 capsules |
| Programmable coffee selections | Espresso, Lungo |
To Next Page