EN
.
11
3
With the machine plugged, remove the cup support and
place an empty container (of at least 1 L / 34 fl oz.) under the
coee outlet.
4
Open and close the machine. Ensure the lever is in lock
position.
i
The light will blink while the machine is heating up. It will take
approximately 30 seconds. When the light becomes steady the
machine is ready. Make sure that no capsule is inserted.
3x <2s
5
Press the buon 3 times within 2 seconds to start rinsing.
With the light blinking orange, let the rinsing procedure
complete automatically. When the light becomes steady
white, the cycle is complete.
i
It should take less than 2 minutes before the rinsing process begins
and water starts to flow. This procedure may take up to 7 minutes.
FIRST STEPS PAGE 2/2