2
1
3 sec.
EN
KR
24
DESCALING / ASSISTANCE VIDEOS ARE AVAILABLE ON WWW.NESPRESSO.COM VISIT “MACHINES” SECTION
Fill the water tank with
fresh drinking water and
put it back in place on the
machine.
To start descaling, push the
buon. The machine will
stop automatically when
complete. ORANGE light
will blink during the entire
descaling process.
When ready, push
the buon to rinse the
machine. Machine will
stop automatically when
complete. ORANGE light
blinking once every 2
seconds confirms the
descaling process is
completed. The procedure
can be stopped at any time
by pushing the buon.
Empty, clean and rinse the
water tank and cup support
thoroughly.
GREEN steady light when ready.
Descaling is completed. Allow the machine to dry
for 10 minutes before using it.
To exit descaling mode,
press the buon and the
lever down at the same
time for 3 seconds.
The machine is now ready for use.
11
9
12
10
14
15
13
16
NOTE: This machine is equipped with a
descaling alert: GREEN and RED steady light.
Machine can only be operated to make coee a
few more times once the alert appears before
descaling becomes mandatory. If the machine
is completely scaled, the descaling program
may not function and the machine will stop
and blink. Pause the program in this case for
several minutes, allowing the descaling agent
to penetrate the scale build-up, then push the
buon again to restart the descaling.
To Next Page
Loading...
Need help?
General
