Nest Protect Backplate
120V connector
4 mounting screws
3 wire nuts
3
MEET YOUR NEST PROTECT
Inside the box you’ll find:
Nest Protect is designed to detect smoke and carbon monoxide in a residential environment.
It has multiple sensors to help it understand what’s happening in your home and a photoelectric
sensor to detect slow, smoldering fires. Nest Protect can be used as a single station or multiple
station alarm.
This guide covers the installation of Nest Protect (Wired) - Model number O5C.
REQUIREMENTS
Wi-Fi, an iOS or Android smartphone or tablet, and a free Nest Account are required for wireless
mobile notifications and software updates. During set up, Wi-Fi and a free Nest Account are
required for wireless interconnect and room naming. After all the Nest Protects in your home
are connected, they can communicate with each other without Wi-Fi.
To Next Page
Loading...