Need help?Do you have a question about the NESTOR MARTIN Harmony 1 and is the answer not in the manual?
General| Brand | NESTOR MARTIN |
|---|---|
| Model | Harmony 1 |
| Category | Boiler |
| Language | English |
How to identify your specific stove model and serial number.
Details on stove warranty, registration process, and Euroheat contact.
Control for air wash air supply, used for wood and smokeless coal.
Used for lighting and refuelling, must remain closed otherwise.
Control for lighting and burning smokeless coal.
Air wash supply control settings for lighting and operation.
Thermostat control for lighting and adjusting burn rate.
Advice on choosing and burning dry wood, including moisture content.
Information on smokeless coal, house coal, lignite, peat, and prohibited fuels.
Guidance on natural wood, hardwoods, softwoods, and log preparation.
Recommended log sizes and materials that should not be burned.
Steps for riddling the grate and safely removing the ash pan.
Information on optional accessories for stove operation and maintenance.
Safe procedure for opening ash pit door and removing ash pan.
Ensuring doors are closed, checking for spilled embers, and handling hot ash.
Step-by-step guide to lighting a wood fire, including initial control settings.
Setting thermostat, air wash, and draught slide for wood.
Setting thermostat and air wash for wood burning.
Reasons for fires failing, going out, or causing smoke and staining.
Addressing fires not developing enough size or heat.
Guidance on timing and technique for adding new logs.
Optimal placement of logs for efficient combustion and airflow.
Correct log loading to ensure airflow and prevent smoke.
How to adjust air settings for desired burn rate and heat output.
Techniques to achieve slow, prolonged burns without tar and smoke.
Leveraging charcoal for sustained heat output.
Step-by-step guide to lighting a coal fire, including control settings.
Setting air wash and thermostat controls for burning coal.
Procedure for using firelighters to start a coal fire.
Reasons for coal fires failing, going out, or causing smoke.
Addressing coal fires not developing sufficient size or heat.
Guidance on timing and technique for adding new coals.
Optimal coal loading for even ignition and minimal smoke.
Adjusting air settings for optimal coal burn rate.
Achieving slow, prolonged burns with coal for extended periods.
Methods for cleaning stove glass, removing stains and soot.
Advice on cleaning the stove body, cast finish, and brass fittings.
Importance of flue warming, periodic sweeping, and block checks.
How to adjust door latches for an airtight seal.
Procedure for removing and refitting the stove's front door.
Instructions for correctly replacing stove glass and seals.
Procedure for adjusting the thermostat setting on Harmony boilers.
Instructions for removing top baffles to clear ash buildup.
To Next Page
