NetApp AFF A Series Install And Setup

a. Open File Explorer.
b. Click network in the left pane.
c. Right click and select refresh.
d. Double-click either ONTAP icon and accept any certificates displayed on your screen.
XXXXX is the system serial number for the target node.
System Manager opens.
7. Configure the system using the data you collected in the ONTAP Configuration Guide.
8. Set up your account and download Active IQ Config Advisor:
a. Log in to your existing account or create and account.
b.
Register your system.
c. Download
Active IQ Config Advisor.
9. Verify the health of your system by running Config Advisor.
10. After you have completed the initial configuration, go to the ONTAP documentation site for information
about configuring additional features in ONTAP.
Option 2: If network discovery is not enabled
If network discovery is not enabled on your laptop, you must complete the configuration and setup using
this task.
Steps
1. Cable and configure your laptop or console.
a. Set the console port on the laptop or console to 115,200 baud with N-8-1.
See your laptop or console’s online help for instructions on how to configure the console port.
b. Connect the console cable to the laptop or console, and connect the console port on the controller
using the console cable that came with your system.
12

NetApp AFF A Series Specifications

General

Brand	NetApp
Model	AFF A Series
Category	Server
Language	English