NetApp AFF A Series Install And Setup

Option 1: If network discovery is enabled
If you have network discovery enabled on your laptop, you can complete system setup and configuration
using automatic cluster discovery.
Steps
1. Use the following animation to set one or more drive shelf IDs
Animation - Set drive shelf IDs
2. Plug the power cords into the controller power supplies, and then connect them to power sources on
different circuits.
3. Turn on the power switches to both nodes.
Initial booting may take up to eight minutes.
4. Make sure that your laptop has network discovery enabled.
See your laptop’s online help for more information.
5. Connect your laptop to the Management switch.
6. Select an ONTAP icon listed to discover:
11

NetApp AFF A Series Specifications

General

Brand	NetApp
Model	AFF A Series
Category	Server
Language	English