NetApp AFF A Series User Manual

Enter the customer’s onboard key management passphrase at the prompt. If the
passphrase cannot be provided, contact NetApp Support.
mysupport.netapp.com
b.
Verify the
Restored column shows yes for all authentication keys: security key-manager key
query
c.
Verify that the
Key Manager type shows onboard, and then manually back up the OKM information.
d.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv advanced
e.
Enter the command to display the key management backup information:
security key-manager
onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You’ll need it in disaster
scenarios where you might need to manually recover OKM.
g.
Return to admin mode:
set -priv admin
h. You can safely shut down the controller.
Verify NSE configuration
1.
Display the key IDs of the authentication keys that are stored on the key management servers:
security
key-manager key query -key-type NSE-AK
After the ONTAP 9.6 release, you may have additional key manager types. The types are
KMIP, AKV, and GCP. The process for confirming these types is the same as confirming
external or onboard key manager types.
◦
If the
Key Manager type displays external and the Restored column displays yes, it’s safe to shut
down the impaired controller.
◦
If the
Key Manager type displays onboard and the Restored column displays yes, you need to
complete some additional steps.
◦
If the
Key Manager type displays external and the Restored column displays anything other than
yes, you need to complete some additional steps.
◦
If the
Key Manager type displays external and the Restored column displays anything other than
yes, you need to complete some additional steps.
2.
If the
Key Manager type displays onboard and the Restored column displays yes, manually back up
the OKM information:
a.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv advanced
b.
Enter the command to display the key management information:
security key-manager onboard
show-backup
c. Copy the contents of the backup information to a separate file or your log file. You’ll need it in disaster
scenarios where you might need to manually recover OKM.
d.
Return to admin mode:
set -priv admin
e. You can safely shut down the controller.
3.
If the
Key Manager type displays external and the Restored column displays anything other than
yes:
a.
Restore the external key management authentication keys to all nodes in the cluster:
security key-
20

NetApp AFF A Series Specifications

General

Brand	NetApp
Model	AFF A Series
Category	Server
Language	English