To Next PageTo Next Page
Need help?Do you have a question about the NetApp HCI Series and is the answer not in the manual?
General| Processor | Intel Xeon Scalable Processors |
|---|---|
| Memory | Up to 1.5TB per compute node |
| Product Family | HCI Series |
| Category | Hyperconverged Infrastructure |
| Local Storage (Compute) | SSD |
| Storage Type | SSD |
| Networking | 10GbE, 25GbE, 40GbE |
| Management | NetApp Element software |
| Hypervisor Support | VMware vSphere |
| Compute Nodes | Available in various configurations |
| Storage Nodes | Available in various configurations |
| Form Factor | Rack-mounted |
Lists the hardware components included in the NetApp HCI system package.
Details the items the user must provide for the installation process.
Provides links to important online documentation and resources for setup.
Instructions for installing rack rails according to safety and airflow guidelines.
Guidance on installing the NetApp HCI chassis into the prepared rack.
Procedure for installing compute and storage nodes into the chassis.
Steps for installing drives into the storage node chassis.
Detailed instructions for cabling compute nodes, including H410C, H610C, and H615C.
Instructions for cabling storage nodes, including H410S and H610S, for network connectivity.
Procedure for connecting power cords to chassis and plugging them into power outlets.
Steps to power on all installed NetApp HCI nodes after cabling.
Guide for configuring a new NetApp HCI installation via the NetApp Deployment Engine.
Steps to add nodes to an existing NetApp HCI installation using Hybrid Cloud Control.
Install GPU drivers in ESXi for H610C nodes and validate functionality.
Install GPU drivers if applicable, and configure out-of-band management (BMC).
Configure out-of-band management (BMC) for the H610S storage node.
