6. Reestablish any SnapMirror or SnapVault configurations.
== Step 6: Return the failed part to NetApp
Return the failed part to NetApp, as described in the RMA instructions shipped with the kit. See the Part
Return & Replacements
page for further information.
= ASA C800 systems
= Install and setup
= Start here: Choose your installation and setup experience
:icons: font
:relative_path: ./asa-c-800/
:imagesdir: /tmp/d20231020-12297-25s5m0/source/./asa-c-250/../media/
For most configurations (including ASA configurations), you can choose from different
content formats.
•
Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
•
Detailed steps
Online step-by-step instructions with live links to additional content.
If your system is in a MetroCluster IP configuration, see the
Install MetroCluster IP Configuration
instructions.
= Quick steps - ASA C800
:icons: font
:relative_path: ./asa-c-800/
:imagesdir: /tmp/d20231020-12297-25s5m0/source/./asa-c-250/../media/
This guide gives graphic instructions for a typical installation of your system from
racking and cabling, through initial system bring-up. Use the
ASA C800 Installation
and Setup Instructions
if you are familiar with installing NetApp systems.
= Videos - ASA C800
:icons: font
:relative_path: ./asa-c-800/
:imagesdir: /tmp/d20231020-12297-25s5m0/source/./asa-c-250/../media/
There are two videos - one showing how to rack and cable your system and one
showing an example of using the System Manager Guided Setup to perform initial
system configuration.
== Video one of two: Hardware installation and cabling
209
To Next Page
