ASA A250 systems
Install and setup
Start here: Choose your installation and setup experience
For most configurations, you can choose from different content formats.
•
Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
•
Detailed steps
Online step-by-step instructions with live links to additional content.
If your system is in a MetroCluster IP configuration, see the
Install MetroCluster IP Configuration instructions.
Quick steps - ASA A250
This page gives graphic instructions for a typical installation of your system from racking
and cabling, through initial system bring-up. Use this guide if you are familiar with
installing NetApp systems.
Access the Installation and Setup Instructions PDF poster:
• English: AFF A250 Installation and Setup Instructions
• Japanese: AFF A250 Systems Installation and Setup Instructions
• Chinese: AFF A250 Systems Installation and Setup Instructions
The ASA A250 uses the same installation procedure as the AFF A250 system.
Videos - ASA A250
There are two videos - one showing how to rack and cable your system and one showing
an example of using the System Manager Guided Setup to perform initial system
configuration.
Video one of two: Hardware installation and cabling
The following video shows how to install and cable your new system.
Animation - Installation and Setup of an AFF A250
The ASA A250 uses the same installation procedure as the AFF A250 system.
1
To Next Page
Loading...
