EasyManuals Logo

Netgate XG-7100 User Manual

Netgate XG-7100
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Product ManualXG-7100
Window Columns x Rows = 80x24
Window > Appearance Font = Courier New 10pt or Consolas 10pt
Window > Translation Remote Character Set = Use font encoding or UTF-8
Window > Translation Handling of line drawing characters = Use font in both ANSI and OEM modes
or Use Unicode line drawing code points
Window > Colours Indicate bolded text by changing = The colour
GNU screen
In many cases screen may be invoked simply by using the proper command line:
Mac OS X
sudo screen /dev/cu.SLAB_USBtoUART1 115200
Linux
sudo screen /dev/ttyUSB1 115200
FreeBSD
sudo screen /dev/cuaU1 115200
If portions of the text are unreadable but appear to be properly formatted, the most likely culprit is a character encoding
mismatch in the terminal. For example, on OS X this is commonly required
sudo screen -U /dev/cu.SLAB_USBtoUART1 115200
Adding the -U parameter to the screen command line arguments forces it to use UTF-8 for character encoding.
4.2.5 Troubleshooting
No Serial Output
If there is no output at all, check the following items:
Ensure the cable is correctly attached and fully inserted
Ensure the terminal program is using the correct port
Ensure the terminal program is configured for the correct speed. The default BIOS speed is 115200, and many
other modern operating systems use that speed as well. Some older operating systems or custom configurations
may use slower speeds such as 9600 or 38400.
Ensure the operating system is configured for the proper console (e.g. ttyS1 in Linux). Consult the various
operating install guides on this site for further information.
Garbled Serial Output
If the serial output apears to be garbled, binary, or random characters check the following items:
Ensure the terminal program is configured for the correct speed. (See “No Serial Output” above)
Ensure the terminal program is configured for the proper character encoding, such as UTF-8 or Latin-1, depend-
ing on the operating system. (See the previous entry under “GNU screen”)
4.2. Advanced Configuration 40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Netgate XG-7100 and is the answer not in the manual?

Netgate XG-7100 Specifications

General IconGeneral
RAM8 GB DDR4
USB Ports2 x USB 3.0
Operating SystempfSense Plus
Form Factor1U Rackmount
Console PortRJ-45 Serial Console
Power Supply100-240V AC, 50-60Hz, Internal
Network Ports2x 10 GbE SFP+ ports, 8x 1 GbE RJ45 ports
Dimensions1.7" (43 mm) H x 17.3" (439 mm) W x 10.1" (256 mm) D