Need help?Do you have a question about the Netgate XG-7100 and is the answer not in the manual?
General| RAM | 8 GB DDR4 |
|---|---|
| USB Ports | 2 x USB 3.0 |
| Operating System | pfSense Plus |
| Form Factor | 1U Rackmount |
| Console Port | RJ-45 Serial Console |
| Power Supply | 100-240V AC, 50-60Hz, Internal |
| Network Ports | 2x 10 GbE SFP+ ports, 8x 1 GbE RJ45 ports |
| Dimensions | 1.7" (43 mm) H x 17.3" (439 mm) W x 10.1" (256 mm) D |
Details the physical Ethernet ports, their types (RJ-45, SFP+), and speeds.
Describes the function of USB ports, console port, power, status LEDs, and reset button.
Explains the physical network interfaces and their connections to the SoC and switch.
Details Link Aggregation Group (LAGG) configuration for combining multiple network links.
Explains Virtual Local Area Network (VLAN) configuration and port assignment.
Describes the 'Switches' section in the pfSense webGUI for managing switch hardware.
Example of configuring the device as a dedicated LAN switch, including WAN reassignment.
Example of splitting the LAN switch into two segments using separate VLANs.
Example of configuring trunking for VLAN tagged traffic, including a management VLAN.
Guides through the initial physical connection and power-up sequence for the pfSense appliance.
Instructions on how to access and log into the pfSense web-based configuration interface.
Steps to set the hostname, domain name, and DNS server configurations for the appliance.
Details on setting up the time server hostname and timezone for accurate timekeeping.
Explains how to configure or spoof the MAC address for the WAN interface.
Instructions for configuring the DHCP hostname for client identification during lease requests.
How to configure firewall rules to block private and bogon IP address ranges from the WAN.
Steps to configure the IP address and subnet mask for the local area network (LAN) interface.
How to reload the configuration to apply changes made in the pfSense interface.
Guide on how to back up and restore the firewall configuration settings.
Explains when and why console access is needed, referring to a specific section for details.
Basic steps for connecting to the console port using a serial terminal emulator on Windows.
Covers advanced steps for console connection, including driver installation and troubleshooting.
Information on professional services offered for complex tasks like CARP configuration and network design.
Details about the manufacturer's warranty and how to obtain support information.
Essential safety instructions and warnings for using the product correctly and avoiding hazards.
Guidelines regarding electrical safety, power cord usage, and grounding requirements.
Information on compliance with FCC rules, including permitted operation and interference limits.
Compliance information specific to Australia and New Zealand regulations.
Explains the meaning of the CE marking, indicating compliance with applicable EU directives.
Information on the disposal and recycling of electronic equipment according to RoHS and WEEE directives.
Formal declaration by Netgate that the device complies with essential requirements of relevant directives.
Outlines the process for resolving disputes, including binding arbitration in Austin, Texas.
Specifies the governing laws and jurisdiction for terms and conditions of use and disputes.
Details the disclaimer of warranties and limitation of liability for products and services.
Step-by-step guide to update the BIOS using the pfSense web interface.
Instructions for reinstalling pfSense using the factory installer image via a USB memstick.
To Next Page