Do you have a question about the NETGEAR AC1750 and is the answer not in the manual?
Model | R6400 |
---|---|
WiFi Technology | 802.11ac |
WiFi Performance | AC1750 (450 + 1300 Mbps) |
USB Ports | 1 x USB 3.0 |
Antenna | 3 external antennas |
Beamforming+ | Yes |
Guest Network | Yes |
Parental Controls | Yes |
Quality of Service (QoS) | Yes |
WiFi Band | Dual Band 2.4GHz and 5GHz |
Ethernet Ports | 5 x 10/100/1000 Mbps Gigabit Ethernet ports |
Processor | Dual Core |
Security Features | WPA/WPA2 |
Memory | 128 MB Flash |
Dimensions | 11.22 x 7.26 x 1.97 in (285 x 184.5 x 50 mm) |
Connect your WPS-enabled device to the cable modem router using the WPS button.
Connect your device manually by selecting the WiFi network name (SSID) and entering the password.
Find help, manuals, and join the community via netgear.com/support.
Check ISP compatibility and contact NETGEAR at 1-866-874-8924 for setup issues.
Access regulatory compliance information and connect power supply.
Identifies the device as an AC1750 WiFi Cable Modem Router, Model C6300v2.
Lists the physical components provided with the router: cable modem router, Ethernet cable, power adapter.
Gather necessary details like username, password, and account number from your ISP.
Turn off and disconnect any existing modems and routers before setup.
Connect the coaxial cable to the wall outlet and the power adapter to the router and outlet.
Wait for the Online LED to turn solid green, indicating the router is ready for ISP activation.
Connect your device via Ethernet cable or WiFi using the router's label information.
Access router setup via http://routerlogin.net or http://192.168.0.1.
Confirm you can log into the router's web interface after initial setup.
Collect ISP account details, model number (C6300v2), serial number, and MAC address.
Visit your ISP's website and follow on-screen instructions to activate your service.
Lists contact details for ISPs like CableOne, Cox, Mediacom, Optimum, and Xfinity.