12
Set Up Arlo Baby
Camera Position
When placing your camera, keep these tips in mind:
• Avoid placing the camera in an area that gets a lot of light shining directly into
the camera lens.
• Infrared lights can reflect o walls and negatively impact video quality. Try to
aim your camera away from walls.
• You can move and zoom the field of view.
• Arlo Baby provides a 110-degree viewing angle as the default. You can change
the field of view to 90, 100, 120 or 130 degree field of view in the Camera
Settings. Position your camera so that the space that you want to monitor is
within the camera’s field of view.
• To help with placing your camera, do a live stream from the Arlo Baby camera.
Aim the camera while watching the video feed on your Arlo smartphone app to
make near-real-time adjustments to the camera’s position.
Charge Your Arlo Baby Camera
The Arlo Baby battery is partially charged when it leaves the factory.
¾ To charge the battery:
1. Connect the smaller end of the USB power cable to the port on the camera.
2. Plug the larger end of the USB cable into the power adapter.
3. Plug the USB power adapter into a wall socket.
The LED blinks fast blue for three seconds when the power adapter is
connected.
The battery’s charge percentage displays in the Settings page for your Arlo
Baby. To access the Settings page, launch the Arlo app or log in to arlo.netgear.
com. Then tap or click
at the upper right of the camera feed and select
Device Settings.
Turn the Arlo Baby Battery Power O and On
Your Arlo Baby camera has a rechargeable battery. You can place the camera in
locations where you cannot connect it to an AC wall outlet. Arlo Baby can work for
several hours at a time using the rechargeable battery.
To Next Page
Loading...