9
Connect With the NETGEAR Installation Assistant
1. Connect your WiFi-enabled computer or mobile device to the
extender using a wired Ethernet or WiFi connection:
• To connect with a wired Ethernet connection, use an Ethernet
cable to connect the Ethernet port on the extender to an
Ethernet port on your WiFi-enabled computer.
• To connect with WiFi, on your WiFi-enabled computer or mobile
device, open the WiFi connection manager and locate and
connect to the extender network called NETGEAR_EXT.
After the connection with your WiFi-enabled computer or mobile
device is established, the Client Link LED lights.
2. Launch a web browser and enter www.mywifiext.net in the address
field of the browser.
The New Extender Setup page displays.
3. Click the NEW EXTENDER SETUP button.
The Create Account page displays.
4. Complete the fields on the Create Account page and click the NEXT
button.
5. Verify that the Access Point/Extender switch is set to
Extender and click the CONTINUE button.
The extender scans for WiFi networks in your area and displays a list.
To Next Page
Loading...