®
Installation Guide
3G+ Mobile Broadband Wireless-N Router MBRN3000
Package Contents
Mobile Broadband Wireless-N Router
Ethernet cable
USB cable with docking station
Power adapter
Router stand
Step 1: Activate your modem
Note: Your modem has to be activated with working
Internet service before you install the router. For a list of
compatible modems, see the NETGEAR website at
http://www.netgear.com/3G.
Step 2: Connect your router
Step 3: Connect your computer
Power
On/Off
Step 4: Power on your router
Wait until the Power LED turns solid green. Then open a
browser.
Note: If the web page does not display, close and
reopen the browser. Enter http://routerlogin.net in the
address bar. Otherwise, check the Troubleshooting
section on the back of this installation guide.
To Next Page
Need help?
General
