Do you have a question about the NETGEAR MBR1200 and is the answer not in the manual?
Frequency Bands | 2.4 GHz |
---|---|
WAN Ports | 1 |
LAN Ports | 4 |
Maximum Wireless Speed | 300 Mbps |
Ethernet Ports | 4 |
VPN Support | Yes |
Wireless Standard | 802.11n |
Security | WPA, WPA2, WEP |
USB Port | No |
Instructions on how to access the router's web interface for configuration and settings management.
Steps to launch the Configuration Assistant for initial setup of Internet and wireless network.
Guidance on manually setting up Internet connection parameters like broadband settings.
Ensuring compatibility and correct setup of operating channel and region for wireless network.
Overview of security features to enhance wireless network protection against unauthorized access.
Detailed steps to manually configure the wireless network name (SSID) and security settings.
Instructions for setting up WEP encryption for data security on the wireless network.
Guidance on implementing WPA and WPA2 security protocols for strong wireless data protection.
Steps to use WPS for easily configuring network name and WPA/WPA2 security.
Configure the router to block specific websites and keywords in web addresses.
Methods to block specific Internet services or port traffic based on defined rules.
Secure the router by changing the administrator password and managing login timeouts.
Steps to change the router's administrator password for enhanced security.
Instructions for downloading and installing new firmware to update the router's software.
Advanced firewall features to make local computers available to the Internet.
Set up rules to forward Internet requests to specific local computers or servers.
Configure rules that trigger incoming ports based on specific outbound traffic.
Check common issues that prevent the router from connecting to the Internet.
Resolve problems where the router has an IP but web pages fail to load.
Restore factory default settings, including admin password and IP address.